About Wiring the Relay Sensor on Touchscreen Devices #

• The DicksonOne Relay Pod is compatible with Touchscreen devices only, which include the TWE/TWP and the TSB

Wiring the DicksonOne Relay Sensor #

About Wiring: #

1. Pin 1: Channel 1 Common
2. Pin 2: Channel 1 Normally Open
3. Pin 3: Channel 1 Normally Closed
4. Pin 4: Channel 2 Common
5. Pin 5: Channel 2 Normally Open
6. Pin 6: Channel 2 Normally Closed

Important: #

Please note the following

1.  Features 1 SPDT 50V DC, 200mA, NO/NC Relay per channel
2. Maximum 22 gauge solid wire recommended
3. Relays are not a controller and cannot be used to turn On/Off remove devices
4. Relays are designed for resistive loads and NOT inductive or capacitive
5. Operates under battery power

Note
To learn more about Touchscreen devices, please visit Touchscreen Topics.