Black push button above sensor:

• Single press/release should transmit a ping packet, flash purple, and green if a successful Acknowledgement is received. If units flashes Red Acknowledgement not received from DicksonOne
• Press and hold the small black button on the left side above the sensor until two rapid purple flashes appear. This should clear the Min/Max values. The Min/Max values will update with the next reading taken.
• Press and hold the small black button on the left side above the sensor for approx 12 seconds until three rapid purple flashes appear. This should scroll the logger’s IP address, Subnet Mask, Gateway, and DNS Server at the top of the LCD screen.