WT540 – Ethernet Temperature Data Logger

Place these data loggers throughout your facility and receive all data automatically at your PC.  No retrieving data from loggers.  This is the easiest and most cost-effective way to create a scalable monitoring network.

  • Email and Text alerts available
  • Eliminates the need to change charts and pens
  • Data automatically downloaded to your computer wirelessly
  • Loggers continue to log in the event of a power outage

These loggers, while wired, are compatible with the WiZARD2 monitoring system and software. Use them in conjunction with your WiZARD2 system or without! They allow you to monitor locations that would have previously been cost prohibitive to monitor wirelessly.

NOTE: For use above 500F (260C) A203 required.

SKU: WT540 Categories: , , ,

No longer available. You may be interested in:

WiZARD2 Ethernet Temperature Data Logger – K-Thermocouple

Alarm Type: High/Low, Low Battery, Calibration Due, Lost Communication
Ambient Operating RH Conditions : 0-95% RH non-condensing (Logger only)
Ambient Operating Temperature Conditions: -22.0 to 122.0F (-30.0 to 50.0C)
Approvals: RoHS, FCC Part 15 Compliance, CE
Battery Backup: 4 AA Batteries
Battery Life (Avg): 6 Months (at 2 Minute Sample Rate in Moderate Conditions)
Cable Details: USB – Male Series A plug to 5 pin Male Series B mini plug.
Cable Length: 6.0ft
Calibration Options: N100 , N300, N400, & N520
Channels: CH1: Temperature, CH2: Temperature
Data Capacity: 32,000 (16,000 per channel)
Dimensions: 1.7 x 4.25 x 4.25in
Download Type: Wireless
Enclosure: Black; ABS Plastic Clam Shell
IP Rating: 21
Included Accessories: USB Cable, AC Adapter, 4 AA Batteries, Quick Start Guide
Mounting Options: Free Standing or Wall Mount (With Keyhole)
Network Requirements: If Host PC and Logger are on separate subnets, both Logger and Host PC subnets must be
able to see each other. For best results, assign a fixed IP Address to the Host PC. If preferred, logger can be setup
using DHCP (contact Dickson Technical Support for
Note on Alarm Type: All alarm conditions will generate a pop-up notification in the Dickson WiZARD Software.
Text/Email notification available with use of WiZARD SECURE Software.
Notes: The WT240 Logger reads temperature and sends data back to the Receiver at regular intervals.
PC Requirements: Minimum of 2 GB RAM; Windows XP (with service pack 3) and Windows 7; 2 available USB ports
Power Cord: 6 ft
Power Source: 120 to 240 VAC, 12 VDC (INTL fittings available)
Power Source Input: AC 100-240 0.5V 60/50 Hz
Power Source Output: DC 9V, 1A
Power Status Indicator: Red/Green/Blue (RGB) LED
Remote Sensor Length: 4
Remote Sensor Type: 1 K T/C with Mini Connector
Response Time: 30 Seconds to 63% of Full Scale
Sample Interval: User Selectable (from 10 seconds to 1 hour in 10 second intervals)
Software Options: W2 Version 1.2.0.11 or higher
Storage Conditions: -22.0 to 158.0F (-30.0 to 70.0C)
Storage Conditions RH: 0-95% RH non-condensing
Temperature Accuracy: +/-1.8F from -22.0 to 122.0F 3.8F Remaining (+/-1.0C from -30.0 to 50.0C 2.1C Remaining)
Temperature Range: -300.0 to 2000.0F (-184.0 to 1093.0C)
Temperature Sensor Type: Digital Temperature Sensor
Unit Weight: 3 lbs
Units/Pkg: 1

Scroll to Top

COVID-19: Contact our team with any questions about optimizing your Dickson products for remote work.

Submit a Ticket