This website uses cookies to help us give you the best experience when you visit.
By using this website you consent to our use of these cookies.
Replacing Batteries
| Device SKUs | Procedure | Additional Context |
|---|---|---|
| TX120 | To replace the battery, open the case by removing the screw on the back of the unit. Remove the battery from its holder by pressing hard on the battery holder tab. Replace the battery with a Lithium CR-2032 type; +side up. | Please note that the logger will stop sampling; however, memory will not be lost when replacing battery. To start sampling again, download the data and then clear the memory. |
| SP125, SP175, SP325 | Remove the battery from its holder by sliding the battery out, using a pencil or other small device. Replace the battery with a Lithium CR2450 or DL2450 type; +side up. Close case with a screw. | |
| Sample #3 | Row 3, Content 1 | Row 3, Content 2 |
| Sample #3 | Sample #3 | Row 3, Content 1 |
| Row 3, Content 1 | Row 3, Content 1 | Row 3, Content 1 |
| Row 3, Content 1 | Row 3, Content 2 | Row 3, Content 2 |