WT230 – Wireless Vaccine Temperature Data Logger

Place these data loggers throughout your facility and receive all data automatically at your PC.  No retrieving data from loggers, no hard wiring loggers back to your PC.  This is the easiest and most cost-effective way to create a scalable monitoring network.

  • One thermistor probe with attached glycol bottle
  • Audio/Visual Alarms
  • Email and Text alerts available
  • Eliminates the need to change charts and pens
  • Vaccine data is wirelessly downloaded to your computer
  • Loggers continue to log in the event of a power outage
SKU: WT230 Categories: , ,

No longer available. You may be interested in:

WiZARD2 Wireless Vaccine Temperature Data Logger

Alarm Type: Audio/Visual Alarms: High/Low Temperatures. Email/Text Alarms: High/Low, Low Battery, Calibration
Due, Lost Communication
Ambient Operating RH Conditions : 0-95% RH non-condensing (Logger only)
Ambient Operating Temperature Conditions: -22.0 to 122.0F (-30.0 to 50.0C)
Antenna Type: Internal
Approvals: RoHS, FCC Part 15 Compliance, CE
Battery Backup: 4 AA Batteries
Battery Life (Avg): 6 Months (at 2 Minute Sample Rate in Moderate Conditions)
Cable Details: USB – Male Series A plug to 5 pin Male Series B mini plug.
Cable Length: 6.0ft
Calibration Options: N100 , N300, N400, & N520
Channels: CH1: Temperature, CH2: Temperature
Data Capacity: 32,000 (16,000 per channel)
Digital Display: Yes
Dimensions: 1.7 x 4.25 x 4.25in
Download Type: Wireless
Enclosure: Black; ABS Plastic Clam Shell
IP Rating: 21
Included Accessories: USB Cable, AC Adapter, 1-Probe with Glycol Bottle, 4 AA Batteries, Quick Start Guide
Mounting Options: Free Standing or Wall Mount (With Keyhole)
Note on Alarm Type: All alarm conditions will generate a pop-up notification in the Dickson WiZARD Software.
Text/Email notification available with use of WiZARD SECURE Software.
Notes: The WT230 Logger reads temperature and sends data back to the Receiver at regular intervals.
Output Signal: 4800 Baud Serial Data
PC Requirements: Minimum of 2 GB RAM; Windows XP (with service pack 3) and Windows 7; 2 available USB ports
Power Cord: 6 ft
Power Source: 120 to 240 VAC, 12 VDC (INTL fittings available)
Power Source Input: AC 100-240 0.5V 60/50 Hz
Power Source Output: DC 9V, 1A
Power Status Indicator: Red/Green/Blue (RGB) LED
Radio Frequency: 900 MHz (902 to 928 MHz)
Remote Sensor Length: 10 ft
Response Time: 30 Seconds to 63% of Full Scale
Sample Interval: User Selectable (from 10 seconds to 1 hour in 10 second intervals)
Signal Strength: Less than 100 mW
Storage Conditions: -22.0 to 158.0F (-30.0 to 70.0C)
Storage Conditions RH: 0-95% RH non-condensing
Temperature Accuracy: +/-1.2F from -20.0 to 120.0F 1.8F (+/-1.0C from -30.0 to 50.0C)
Temperature Range: -55.0 to 122.0F (-48.0 to 50.0C)
Temperature Sensor Type: Thermistor hard wired to PBC, submersible tip sealed in leak-proof glycol bottle Glycol
will freeze at -55F
Unit Weight: 3 lbs
Units/Pkg: 1
Wireless Range: 300 ft

Scroll to Top

COVID-19: Contact our team with any questions about optimizing your Dickson products for remote work.

Submit a Ticket