WH545 - Ethernet Temperature & Humidity Data Logger

Alarm Type: High/Low, Low Battery, Calibration Due, Lost Communication
Ambient Operating RH Conditions : 0-95% RH non-condensing
Ambient Operating Temperature Conditions: -22.0 to 122.0F (-30.0 to 50.0C)
Approvals: RoHS, CE
Battery Backup: 4 AA Batteries
Battery Life (Avg): 1 Month/Back-up Only (at 2 Minute Sample Rate in Moderate Conditions). Logger will save
logged data, but will not send data when running on battery power only.
Cable Details: For Setup Only: USB – Male Series A plug to 5 pin Male Series B mini plug (6 ft).; Standard Ethernet (7
ft)
Calibration Options: N100 , N300, N400, & N520
Channels: CH1: Temperature, CH2: Humidity
Data Capacity: 32,000 (16,000 per channel)
Dimensions: 1.7 x 4.25 x 4.25in
Download Type: Ethernet
Enclosure: Black; ABS Plastic Clam Shell
Humidity Accuracy: +/-2.0% RH from 0.0 to 60.0%; +/-3.0% RH from 60.0 to 95.0%
Humidity Range: 0-95% RH non-condensing
Humidity Sensor Type: Digital RH Sensor
IP Rating: 21
Included Accessories: USB Cable, AC Adapter, 4 AA Batteries, Quick Start Guide
Mounting Options: Free Standing or Wall Mount (With Keyhole)
Network Requirements: If Host PC and Logger are on separate subnets, both Logger and Host PC subnets must be
able to see each other. For best results, assign a fixed IP Address to the Host PC. If preferred, logger can be setup
using DHCP (contact Dickson Technical Support for
Note on Alarm Type: All alarm conditions will generate a pop-up notification in the Dickson WiZARD Software.
Text/Email notification available with use of WiZARD SECURE Software.
Notes: The WH245 Logger reads temperature and humidity and sends data back to the Receiver at regular intervals.
PC Requirements: Minimum of 2 GB RAM; Windows XP (with service pack 3) and Windows 7; 2 available USB ports
Power Cord: 6 ft
Power Source: 120 to 240 VAC, 12 VDC (INTL fittings available)
Power Source Input: AC 100-240 0.5V 60/50 Hz
Power Source Output: DC 9V, 1A
Power Status Indicator: Red/Green/Blue (RGB) LED
Remote Probe Dimensions : Houses thermistor and RH sensor in polycarbonate plastic; 1.5″ x 0.5″ (1.25cm x
4.5cm)
Remote Sensor Length: 10 ft
Response Time: 30 Seconds to 63% of Full Scale
Sample Interval: User Selectable (from 10 seconds to 1 hour in 10 second intervals)
Software Options: W2 Version 1.2.0.11 or higher
Storage Conditions: -22.0 to 158.0F (-30.0 to 70.0C)
Storage Conditions RH: 0-95% RH non-condensing
Temperature Accuracy: +/-0.8F from 20.0 to 122.0F 1.8F Remaining (+/-0.44C from -7.0 to 85.0C 1.0C Remaining)
Temperature Range: -22.0 to 185.0F (-28.0 to 85.0C)
Temperature Sensor Type: Digital Temperature Sensor
Unit Weight: 3 lbs
Units/Pkg: 1